International Publications since 2014

  1. Moudache, S., Bensaid, S., Cheriet, A. and Trichet, D. (2025), “Fast and direct assessing defect dimensions in conductive materials using a double GMR-based eddy current sensor”, Sensor Review, https://doi.org/10.1108/SR-12-2024-0961
  2. Aissaoui, H., Bensaid, S., Trichet, D. et al. Electrical Conductivity Mapping Evaluation of a Unidirectional Carbon Fiber Composite Material Based on a Multiobjective Inversion Method. J Nondestruct Eval 44, 32 (2025). https://doi.org/10.1007/s10921-025-01168-yF.
  3. Barrarat, B. Helifa, S. Bensaid, I. K. Lefkaier and K. Rayane “Optimal design of an eddy current sensor for detecting and characterizing cracks by data inversion: parametric study.” Kerntechnik (2025).Doi:10.1515/kern-2024-0094
  4. I.N. El-Ghoul, A.E. Lakhdari, S. Bensaid, A. Aissaoui, A.T. Ouamane, NEURAL NETWORK EDDY CURRENT NON-DESTRUCTIVE EVALUATION OF CONDUCTIVE COATINGS THICKNESS, Journal of Engineering and Technology for Industrial Applications, 2024, DOI: 10.5935/jetia.v10i50.1356
  5. F. Barrarat, B. Helifa, S. Bensaid, I. K. Lefkaier and K. Rayane “Optimal design of an eddy current sensor for detecting and characterizing cracks by data inversion: parametric study.” Kerntechnik (2025). Doi:10.1515/kern-2024-0094
  6. F. Barrarat, B. Helifa, S. Bensaid, et al. Detection and Classification of Surface Cracks Using Deep Learning Based Autoencoders in Eddy Current Testing. IEEJ Transactions on Electrical and Electronic Engineering, 2024. DOI: 10.1002/tee.24243
  7. Barrarat, F., Helifa, B., Lefkaier, I. K., Bensaid, S., & Rayane, K. Defect Reconstruction Using Multilayer Perceptron for Regression and Classification Tasks Based On Eddy Current Signatures. Materials Evaluation, 82(10), 47-56, 2024. DOI: 10.32548/2024.me-04439
  8. M. REZKI, S. Bensaid, H. Houassine, Simple Extraction Method of Magnetic Hysteresis Curve from Measurement Data, Measurement Science and Technology, Volume 36, Number 1, 2025, DOI : 10.1088/1361-6501/ad8594
  9. Gherdaoui, L., Bensaid, S., Saoudi, N., Trichet, D., & Houassine, H., Eddy Current Based Measurement System For Evaluating Fiber Distribution To Predict Cracks in Steel Fiber Reinforced Concrete: Experimental Study, Metrology Measurement System, Vol. 31,No. 4. 2024, DOI: 10.24425/mms.2024.152047
  10. Nebair, H., Zidelmel, S., Helifa, B. Bensaid, S., Lefkaier, I. K. Hardness and Ferrite Grain Size Evaluation of X70 Steel Using Magnetic Barkhausen Noise Method. J Nondestruct Eval 43, 57 (2024). https://doi.org/10.1007/s10921-024-01073-w
  11. Saidoune A., Houassine H., Bensaid S., Yassa N., Abbas S., Experimental study of a teeth flux sensor for detection, location and severity evaluation of induction machine stator faults, Sensor Review 26 March 2024. DOI: 10.1108/SR-11-2023-0618
  12. Barrarat, F., Bensaid, S., Rayane, K., Helifa, B., Lefkaier, I. K., & Zorig, A. Fast and efficient inversion methods for crack sizing using Bz magnetic signature. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 37(2), e3174. 2023.
  13. Gherdaoui, L., Bensaid, S., Trichet, D., Houassine, H., & Saoudi, N. (2023). Complex Magnetic Permeability Evaluation of Steel Fibers Using Eddy Current Nde and Inverse Problem Methods. Progress in Electromagnetics Research Letters, 113. 2023.
  14. Barrarat, F., Rayane, K., Helifa, B., Bensaid, S., & Lefkaier, I. K. New design of rotating eddy current probe for arbitrary orientation cracks detection. Sensor Review, 43(4), 280-294. 2023.
  15. Madi, S., & Saoudi, K. Parameter identification of the photovoltaic panel’s two-diode model. International Journal of Power Electronics and Drive Systems (IJPEDS), 14(4), 2354-2361. 2023
  16. Chaouche Sahnoun R., Houassine H., Moulahoum S., Chaouche Sahnoun M., Bensaid S., A Robust Approach for Locating and Assessing Mechanical Faults in an Actual Transformer Winding Using the State Space of Its Lumped Equivalent Model, Russian Journal of Nondestructive Testing 58(6):488-498, September 2022. DOI: 10.1134/s1061830922060092
  17. H. Nebair, B. Helifa, S. Bensaid, S. Zidelmel, I.K Lefkaier, Martensite morphology and volume fraction evaluation of dual-phase X70 steel using magnetic Barkhausen noise technique, Journal of Magnetism and Magnetic Materials, Volume 555, 1 August 2022.
  18. Ouadfel G., Houassine H., Gacemi A., Bensaid S., Frequency Response Analysis Technique of Short Circuit Faults Detection in Photovoltaic Single-Phase Inverter Experimental Study European Journal of Electrical Engineering EJEE, Vol. 23, No. 4, August, 2021, pp. 337-343.
  19. Bensaid, S. Global Inductance Computation of a Multilayer Circular Air Coil with a Wire of Rectangular Cross Section: Case of a Uniform Current Distribution. Progress In Electromagnetics Research M, 102, 149-158, 2021. doi:10.2528/PIERM21031704
  20. S. Bensaid, O.A. Safer, D. Trichet, et all, Eddy Current Non-Destructive Characterization of Carbon Fiber Reinforcement Composites Considering Capacitive Effect, Journal of Composite and Advanced Materials (RCMA) 31 (2), 73-79, 2021. DOI: 10.18280/rcma.310202
  21. N. Dahmane, A. Ayad, S. Bensaid, Eddy current evaluation of recovered conductive waste purity, Waste Management 77, pp-43–49 (2018), DOI : 10.1016/j.wasman.2018.05.002
  22. Nebair, H., Cheriet, A., El Ghoul, I. N., Helifa, B., Bensaid, S., & Lefkaier, I. K.. Bi-eddy current sensor based automated scanning system for thickness measurement of thick metallic plates. The International Journal of Advanced Manufacturing Technology, 1-7, (2018).
  23. Safer O.A, Bensaid S., Trichet D., Wasselynck G., Transverse Electrical Resistivity Evaluation of Rod Unidirectional Carbon Fiber-Reinforced Composite Using Eddy Current Method, IEEE Transactions on Magnetics, 02 October 2017. Doi : 10.1109/TMAG.2017.2751962
  24. Madi, S., & Kheldoun, A. Bond graph-based modeling for parameter identification of photovoltaic module. Energy, 141, 1456-1465, 2017.
  25.  I-N El Ghoul, A. Cheriet, S. Bensaid, “FVM model and virtual instrument based system for electromagnetic characterization of steel material”, JAEST, (2016) 2(2): 87-90, ISSN: 2352-9873
  26.  Bensaid, S.; Trichet, D.; Fouladgar, J., “Optimal Design of a Rotating Eddy-Current Probe – Application to Characterization of Anisotropic Conductive Materials,” IEEE Transactions on Magnetics, vol.51, no.3, pp.1,4, March 2015.  Doi : 10.1109/TMAG.2014.2363174

Published Books since 2012

  1. Co-auteurs de quatre chapitres du livre dirigé par Mouloud Féliachi : “Inductics : Analysis, Multi-physical Modelling and Optimal Design of Electromagnetic Devices and Materials” Editions Pages Bleues Internationales, Septembre 2022. ISBN : 978-9947-34-263-3
  2. Samir Bensaid, Chaouch Souad et Saad Belhamedi, Examens corrigés d’Electrotechnique Fondamentale 2, Editions Pages Bleues Internationales, Juin 2022. ISBN :978-9947-34-254-1
  3. Hamza Houassine & Samir Bensaid “Electrotechnique Fondamentale 1 : Cours et exercices corrigés“, Editions Pages Bleues Internationales, Octobre 2021. ISBN :978-9947-34-302-9
  4. Samir Bensaid & Hamza Houassine, “Electrotechnique Fondamentale 2 : Cours et exercices corrigés“, Editions Pages Bleues Internationales, Avril 2021. ISBN :978-9947-34-210-7
  5. Rezki, M., Bensaid, S., Griche, I., & Houassine, H. Five PV Model Parameters Determination Through PSO and Genetic Algorithm, a Comparative Study. In International Conference in Artificial Intelligence in Renewable Energetic Systems Springer, Cham. pp. 14-21, 2019, November.
  6. J. Fouladgar, D. Trichet, S. Bensaid, G. Wasselynck, “Chauffage par induction des matériaux composites“, Chapitre V du livre “ELECTROTHERMIE”, Traité EGEM (série Génie Electrique), Hermes – Lavoisier 2012, ISBN : 978-2-7462-2147-5.
  7.  Javad Fouladgar, Didier Trichet, Samir Bensaid and Guillaume Wasselynck : “Induction Heating of Composite Materials”, chapter V of Electrothermics book, Wiley editions, February 2012, ISBN: 9781848212428